Semi-Automatic permanent magnet synchronous motor electric vehicle Custom made in China – replacement parts – in Sorocaba Brazil Die Cutter and Creasing Machine for Carton Boxes with top quality

by | Sep 24, 2020 | Product Catalog

Semi-Automatic permanent magnet synchronous motor electric vehicle Custom  made in China - replacement parts -  in Sorocaba Brazil  Die Cutter and Creasing Machine for Carton Boxes with top quality

We – EPG Group the largest worm gearbox, couplings and gears factory in China with 5 distinct branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

MY Series
 

  • Technical specs:
Design Unit MY1200 MY1300 MY1500
Max. Paper Dimensions mm 1200*780 1300*960 1500X1100
Min. Paper Dimension mm 350*350 400*400 500X400
Max. Die-chopping Measurement mm 1180*760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Wor ept Stress T three hundred three hundred three hundred
Max. Paper Thickness mm one-seven one-seven 1-7
Die-cutting Precision mm ±0.5 ±0.five ±0.5
Complete Electrical power KW fifteen fifteen 19
Whole Weight KG 11500 13000 16000
Total Dimension mm 5150*4000*2145 5670*4100*2145 6100*4600*2205
  • Attributes of the equipment:

Principal Attributes:

  • The Bobst variety lower composition helps make the slicing system motion like a scissor, it will comprehend a complete and less complicated minimize.
  • Principal worm gear utilizes alloy copper content, after the experienced operator’s handbook scraping treatment method and rigorous regular screening, it can makes certain the driving elements 10 years lifestyle.
  • The major chains adopt imported British Renold brand, the distinctions of 10 chains are considerably less than .2mm.
  • The connect amongst equipment box and driving shaft adopts sleeve and pin structure making certain a sturdy relationship.
    • Speed:  

The machine adopts frequency controller to obtain stepless pace acceleration which can attain to 4500 times for every hour. Throughout actual creation, it can usually run at 3600 to 4000 moments per hour according to the good quality of the board. If the quality of the paper is very good, a good operator even can operate the machine at 4200 instances per hrs without emotion as well difficult.

  • Protection:

As it is shown in the image of the machine, the machine adopts rear component paper feeding approach which keeps the operator away from the die-reducing element. The mounting and adjustment of the die plate is also accomplished outdoors of the die-chopping portion with sensors and detectors at die-chopping element to make sure that the equipment can not be commenced when the die-reducing plate is at adjustment standing.
Apart from the sensors at die-slicing component, there are sensor or approach switches at window element to make the total device at monitoring standing to make certain its safety.

  • Procedure ease:

There is Gentleman-machine interface installed in the control panel which will shows the security position of the machine as properly as malfunctions to aid the operator. Camera is also set up in front of the operator for him/her to keep track of the operation standing at the supply part.

  • Major Constructions and Essential Material Utilised
    • Four Main Huge Areas:

They are referring to: bottom station, relocating system, higher platform and machine wall. The bottom station is produced of grey cast iron -HT 200 the moving system is ductile iron – QT 42-10 and the equipment wall is high quality A3 steel.

  • Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear kinds a relocating established to make sure secure pressure out set of not significantly less than three hundred tons.
 

The materials for the worm shaft is 40Cr with quenching therapy and equipment hardness HRC forty five-fifty. the material for the worm is copper alloy – ZQAL9-4.
 

The bearing that is employed is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-slicing and Creasing Element:

The drive is transferred via crank rod to pendulum which will bring the transferring platform to go up and down to get to die-cut and creasing purpose.
The pendulum is produced of substantial good quality ductile iron. The pendulum axis is done by induction harden with floor hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely adhere to the specification of 1080 type automatic die-slicing and creasing device. In contrast with automated die-cutting and creasing machine which is utilised for cardboard die-reducing, this variety of semi-automatic die-chopping and creasing equipment is mainly used for corrugated board which wants significantly less pressure for die-cutting, in this circumstance quite some producers have produced more compact width on the pendulum and scaled-down diameter on the pendulum shaft. We maintain wider pendulum and greater diameter on its shaft to make our equipment last for a lengthier existence.                                    
The die-slicing plate employs 7 mm seventy five Crl plate which has far more hardness and life span than the manganese plate.  

  • Board Conveying:

It adopts 3-cam intermittent positioning gadget to ensure the boarding conveying accurate and stable.
 

The equipment employs gripper bar kind with 12A lengthy joints chain which is significantly less in fat and considerably less shock to the intermittent device underneath the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with substantial precise and top quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- gentle in fat and substantial in power.

  • Electric Element

 

The electrical elements are designed and assembled according to the European CE normal and employs entire world wide known manufacturer goods.

  • Set up of Die

The die mounting and dismounting adopts side withdrawing techniques which time saving and easy for procedure.
There are two ways for the fixation of the die-possibly by bolt or clippers which are subject to customer’s guidance.
The chase loc ept is pneumatic which is straightforward, hassle-free and reputable.

  • Particular People of Our Device:
    • Clever And Specific Front Lay Layout:

In comparison with the card board sheet, the corrugated board has more energy. If the corrugated board abnormally reaches to the entrance lay, it will hurt the front lay and the gripper bar when the entrance lay reaches to its optimum placement.
Usually the producers will install sensors on this part to quit the equipment when the paper is fed abnormally to the front lay. Nevertheless, when the device is operating at the substantial pace, the inertia will provide the machine to run for a even though to make the front lay to its maximum point and then also hurt the front lay and the gripper bar.
Our unique design and style is that when the abnormal board feeding takes place and getting detected, the front lay can in no way reaches to its maximum level which tends to make totally free from front lay and gripper bar damages since of irregular paper feeding.
As it is our specific layout, so there is no image to be shown below.

  • Optional Delivery System:

According to the requirement of the client we can do the shipping and delivery platform possibly square type or E type (as demonstrated in the image) . If the shopper has adequate pallets, he can decide on sq. type. If the customer does have enough pallet, he can choose, E type platform for which will also provide 4 delivery trolleys.                     

  • Pneumatic Preloading and Lifting Phase Unit:

 

       
The pre-loading device is pneumatic pushed. When one particular paper dimension is established, when you do other pile of pre-loading, there is no hassle of you to reset the pre-loading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Quite some of the die-reducing equipment producers use direct feeding strategy which is the operator will feed the board immediately to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 seconds which can make the board feeding work hard and inaccurate.
Our machine uses an additional dance roller feeding method whose board feeding time can be lengthen to .6 2nd. With each other with the conveying parts it tends to make an easier operate of the operator and faster in performance of the equipment.
For illustration:  If an operator operates the immediate feeding semi-computerized die-reducing machine at 3300 sheets for each hour, he can easily operate our machine at 3700 – 4000 sheets for each hour.

  • Configurations:

 

Title Model and Origin Remarks
Bearing SKF Swiss Important component
IKO Japan or HangZhou, China Not key part
Chain Renold U.K Primary Chain ( Discrepancy of much less than .2 mm for per ten chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image Electric powered Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Primary Motor Siemens Joint Undertaking
PLC Delta, ZheJiang  
Guy-equipment Interface Delta  
Pneumatic Elements Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and shipping and delivery CPG ZheJiang  

 
 
 

/ The use of original tools manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the listed substitute parts contained herein are not sponsored, approved, or produced by the OEM. /

Semi-Automatic permanent magnet synchronous motor electric vehicle Custom  made in China - replacement parts -  in Sorocaba Brazil  Die Cutter and Creasing Machine for Carton Boxes with top quality

Semi-Automatic permanent magnet synchronous motor electric vehicle Custom  made in China - replacement parts -  in Sorocaba Brazil  Die Cutter and Creasing Machine for Carton Boxes with top quality