DUMP TRAILER Power UNIT

by | Jan 18, 2021 | Product Catalog

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
General Description
This energy unit includes a electrical power up gravity down circuit. Start off the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be supplied if necessary. Also a pressure compen sated movement control is often extra to your circuit to control the descent speed in the cylinder.
Remark: Please consult our product sales engineer for that unique pump displacement, motor energy or tank capacity.
Unique Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities.N46 hydraulic oil is proposed.
4. The power unit should be mounted horizontally.
five. Check the oil level within the tank following the first operating of your energy unit.
six. Oil shifting is needed immediately after the initial one hundred operation hrs, afterwards after just about every 3000 hours.

DUMP TRAILER Energy UNIT-DOUBLE ACTING
Standard Description
This electrical power unit has a electrical power up power down circuit with load holding on both A & B ports. A pressure compensatred flow management is often added to circuit to control the decent pace of your cylinder.
Specific Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before installation of the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities. N46 hydraulic oil is advisable.
four. The energy unit need to be mounted horizontally.
five. Check the oil degree during the tank after the original operating of your energy unit.
6. Oil changing is needed following the initial a hundred operation hours, afterwards as soon as every 3000 hours.