Materials Dealing with Electrical power UNIT 1
Common Description
This energy unit is made to the fork lift business, consisting of highly effective gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down motion are managed through the lever in the manual release valve, that is equipped with an electric switch to activate the motor. The lowing speed is controlled from the stress compensated flow control valve.
Particular Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all the hydraulic parts concerned ahead of installation of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
4. Oil altering is required after the first a hundred operation hours, afterwards when just about every 3000 hrs.
5. The energy unit proven is made to be mounted horizontally.
Material Handling Electrical power UNIT two
Basic Description
This energy unit options energy up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing speed managed through the strain compensated flow control 
valve. Items of this series is usually extensively used in the business of logistic gadgets for instance fork lift, mini lift table, etc.
Particular Notes
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned before mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which must also be clean and free of impurities, N46 hydraulic oil is suggested .
4. Oil altering is required immediately after the original 100 operation hrs,afterwards the moment just about every 3000 hours.
5. The power unit should be mounted horizontally.